User's Manual

If after pressing the Talk button, you receive three “beeps” and no dial tone, check the

following:

BASE UNIT

is plugged into a power source.

2. If you had a power failure or had unplugged the BASE UNIT, replace the

HANDSET on the BASE UNIT for 2 to 5 seconds to reset the system.

NOTE:

If none of the telephones in the house are working, disconnect one set at a time to

verify that none of the phones are causing the problem. If you still have a problem

after doing this, and your telephone still does not work, please contact your local

phone company.

Problem Solving