Energy Guide

Q-GO HD Dash Cam

Battery Care and Charging Guide

The rechargeable battery in the Q-GO HD Dash Cam is designed to hold a charge

that can last up to ~3 minutes with the display on. The battery is designed to

maintain the time, and to keep the device in standby mode in case of a motion

event or G-Sensor detection.

Similar to a battery in a cell phone, the Q-GO HD Dash Cam requires proper

battery maintenance in order to achieve its full potential.

Be sure to do the following when charging your Q-GO HD Dash Camera:

• Only use the Charger that was included with your Q-GO HD

Using an incorrect charger will not allow the battery to properly

recharge, or maintain sufficient power while in operation.

PAGE 1
Q-GO HD Dash Cam Battery Care and Charging Guide The rechargeable battery in the Q-GO HD Dash Cam is designed to hold a charge that can last up to ~3 minutes with the display on. The battery is designed to maintain the time, and to keep the device in standby mode in case of a motion event or G-Sensor detection. Similar to a battery in a cell phone, the Q-GO HD Dash Cam requires proper battery maintenance in order to achieve its full potential.
PAGE 2
• Charge your Q-GO HD for at least 2 hours before disconnecting power. This is required for the battery to achieve full capacity and avoid reporting full when only limited capacity it realized.