Assembly Instructions

ManualsBrandsPumpkin Hollow ManualsHalloweenWitches with Cauldron

EASY ASSEMBLY AND OPERATION INSTRUCTIONS

280-2699 Sitchwick sisters

Please follow the step by step guide and enjoy your Sitchwick sisters!

1/5

B C

Z Z1 Z2

U V W X Y

Q R S

J K L M

F G

PARTS LIST

A. Base

B. Support Poles x 2

C. Torso Frame

D. Center Witch Frame

E. Right Side Center Witch Frame

F. Left Side Center Witch Frame

G. Center Witch Head

H. Right Side Witch Head

I. Left Side Witch Head

J. Cauldron

K. Center Witch Costume

L. Center Witch Right Arm

M. Center Witch Left Arm

N. Right Side Witch Costume

O. Right Side Witch Right Arm

P. Right Side Witch Left Arm

Q. Left Side Witch Costume

R. Left Side Witch Right Arm

S. Left Side Witch Left Arm

T. Center Witch Cape

U. Right Side Witch Cape

STEP 2

NOTE: The speaker on the Function Control Box located on the (C) Torso Frame

should be facing front.

Assemble the (C) Torso Frame onto the (B) Support Poles as shown and secure by

aligning the quick-connect push buttons into the pre-drilled holes.

V. Left Side Witch Cape

W. Center Witch Hat

X. Right Side Witch Hat

Y. Left Side Witch Hat

Z. Stir Stick Top

Z1. Stir Stick Middle

Z2. Stir Stick Base

Z3. Adapter

Input: 100 - 240VAC 50/60Hz

Output: 5.9V 1.5A

STEP 1

NOTE: The longer end of the (A) Base goes towards the front.

First, assemble the (B) Support Poles to the (A) Base as shown and secure by aligning the

quick-connect push buttons into the pre-drilled holes.

WARNING

This item is not a toy and should be used for decoration only. This item contains small parts that can be a

choking hazard. Keep all plastic and wire parts away from children.

1. Please use the adapter supplied by the manufacturer.

2. Please assemble the item according to the instructions. Connect all wires according to to their matching

color.

3. Children should be supervised by adults. The item should not be grabbed, as it becomes a tipping

hazard. Keep away from the adapter, as it heats up during operation.

Please read all instructions carefully before assembling. Save this instruction sheet for future reference.

CARE AND STORAGE INSTRUCTIONS

For best performance operate your item indoors. When not in use, store this product in its original

packing. Keep away from heat and moisture.

Summary of content (5 pages)

PAGE 1
EASY ASSEMBLY AND OPERATION INSTRUCTIONS 280-2699 Sitchwick sisters WARNING This item is not a toy and should be used for decoration only. This item contains small parts that can be a choking hazard. Keep all plastic and wire parts away from children. 1. Please use the adapter supplied by the manufacturer. 2. Please assemble the item according to the instructions. Connect all wires according to to their matching color. 3. Children should be supervised by adults.
PAGE 2
G G D H D I D C E I F F F E STEP 3 Assemble the (D) Center Witch Frame onto the (C) Torso Frame as shown and secure by aligning the quick-connect push buttons into the pre-drilled holes. Attach the (E) Right Side Center Witch Frame through the slot housings located at the bottom of the (C) Torso Frame as shown. Attach the (F) Left Side Center Witch Frame through the slot housings located at the bottom of the (C) Torso Frame as shown.
PAGE 3
C Try me / Essaie-moi / Pruébame Sensor / Détecteur / Sensor J C 5.9 V J C ADAPTER STEP HERE J (Not Included) A OPTIONAL: If you choose to use the Step Here Try-Me Activation Pad, plug the connector into the input receiving jack marked “TRY ME” on the Function Control Box and set the Step Here pad in front of the character when ready to display. STEP 6 Set the (J) Cauldron onto the (A) Base by using the slots located at the front of the (A) Base as shown.
PAGE 4
Q T V U K N V Q STEP 8 Set the (T) Center Witch Cape onto the shoulders of the Center Witch. Secure under the chin and at the back with the hook & loop closures as shown. STEP 9 Set the (W) Center Witch Hat onto the (G) Center Witch Head. Set the (X) Right Side Witch Hat onto the (H) Right Side Witch Head. Set the (Y) Left Side Witch Hat onto the (I) Left Side Witch Head as shown and secure in place with the hook & loop closures.
PAGE 5
1 2 Z Z L L M Z1 3 4 L Z M Z2 Z1 J Z2 IR Sensor Location Ensure that the gauze / fabric does not cover the hole for proper function. STEP 10 NOTE: The Stir Stick has size-specific connections and can only be assembled one way. First, slide the (Z) Stir Stick Top down through the hole in the hand of the (L) Center Witch Right Arm as shown.