0V Li-ion Cordless impact Driver Table Of Contents Topic Page 1 GENERAL SAFETY RULES 24 2 SYMBOLS 4 3 ADDITIONAL SAFETY RULES 45 4 BATTERY CHARGER & PLUG 58 5 OPERATION 89 & MAINTENANCE 910 7 LIMITED WARRANTY 11-13 WARNING] READ AND CALL SAFETY PRECAUTIONS IN THIS MANUAL BEFORE OPERATION. FAILURE TO COMPLY WITH INSTRUCTIONS IN THIS MANUAL COULD RESULT IN PERSONAL INJURY, PROPERTY DAMAGE, AND/OR VOIDING OF YOUR WARRANTY. PULSAR PRODUCTS, INC.
20V Li-ion Cordless impact Driver How to Obtain Warranty Service: Take the original receipt and product to the place of purchase or mall the original receipt and product to the address found on the web sits If purchased on-line. Iris recommends you retain all of your graceless covering the purchase and maintenance of your power tool. Pulsar will not deny you warranty coverage as long as proof of purchase or service can be obtained.
20V Li-ion Cordless impact Driver Personal safely « Stay alert, watch what you ars doing and use comment sense when operating a power too!. Do not use 3 power too! while you are tired or under the influence of drugs, alcohol or medication. A moment of intention while operating power tools may result in serious personal injury. + Use safely equipment. Always wear eye protection.
20V Li-ion Cordless impact Driver LIMITED WARRANTY Limited 3 Year Warranty: From tha date of original purchase, warrants 1o fhe original purchaser, that each power ool sold, shall be free from defect in material and workmanship, for the rems and time period set forth blow. Pulsar at ifs discretion, agrees fo repair or replaces any defective part that upon examination, inspection, and testing by a authorized service dealer, is found to be defective within the original warranty period.
20V Li-ion Cordless Impact Driver 20V Li-ion Cordless Impact Driver Less of control can cause personal injury. * Store the tool in 2 clean dry place. = Hold tool by insulated gripping surface when performing an operation whets the cutting too! may contact hidden wiring. Contact with a “live” and shock the operator. Al repairs must be performed by 2 qualified electrician = Always wear salty goggles or eye protection when using this tool. Uss 2 dust mask or respirator for applications which generate dust.
20V Li-ion Cordless impact Driver LED worldlier The too! has an LED light to illuminate the work ass and improve vision when working in areas with insufficient light The LED light will switch on automatically while the trigger switch is depressed Hook The hook is convenient for temporarily hanging the fool. L Groove the hook, insert it into 3 groove in the totals housing on This can be installed on both side of the tool. To Install e dither SIDS and then secure it with a sower.
20V Li-ion Cordless impact Driver 1. Connect tha the prows cord of the charge with a wall socket. The charging indicator eight runs green 2. Slide tha battery anti tha charger. The there intelligent battery indicators will continue fishing when start charging. Two indicators will fish intern when tha capacity reach 70%. 3. About one hour irate, battery wail full charge, and the charger indicator turn green again. At the moment thees indicators (gran, loyalism, red) light up together. 4.