User's Manual
Table Of Contents
- Cover
- Approvals And Safety Summary
- Introduction 1
- 1.1 About This Manual
- 1.2 Supporting Collateral
- 1.3 About The 7535 G2 Hand-Held Computer
- 1.4 7535 G2 Hardware Architecture
- 1.5 The Portable Docking Module
- Controls 2
- Support Services And Worldwide Offices
Psion Teklogix 7535 G2 Hand-Held Computer Service Manual 17
Chapter 2: Controls
Overview
2.1 Overview
This chapter describes the controls of the 7535 G2.
2.1.1 Identifying Hardware
The 7535 G2’s hardware configuration is listed in the information provided by the System Properties
applet in the Control Panel.
To reach this manually:
1. Press [BLUE] + 0 to open the start menu.
2. Select Settings > Control Panel. The Control Panel opens.
3. Double-click on the System icon. The System Properties window opens.
4. Click on the Properties tab. Properties lists the hardware and software in the 7535 G2.
Listed items include:
• Date codes for the 7535 G2’s boot software (‘boot code’), peripheral-controller code (‘PCON
code’) and OS software (‘WinCE code’).
• Processor type and speed.
• Amount of RAM and flash memory.
• Type and orientation of display.
• Presence and type of touchscreen.
• Presence and type of scanner.
• Type of keyboard.
• Presence of heater.
• Serial number of main logic board (‘MLB Serial’).
• Serial number of device.
• Presence and type of card in internal PCMCIA and Compact Flash slots (‘PCM/CF Slots-’).