Software Guide

Monitor
Tsunami
®
800 & 8000 Series - Software Management Guide 236
Click Refresh to view updated link statistics.
To view detailed SU/End Point B Link statistics, click Details icon in the SU/End Point B Link Statistics screen. The
following screen appears depending on your device:
Local Signal (dBm) Represents the signal level with which the device at the local end receives frames from the
device at the remote end, through wireless medium.
Local Noise (dBm) Represents the noise measured at the local end antenna ports.
Local SNR (dB) Represents the SNR measured by the receiver at the local end and is based on the Local
Signal and Local Noise.
Remote Rx Antenna
Port Info
Indicates the status of the remote end antenna ports. The antenna ports status is same as
explained in Local Antenna Port Info.
Remote Signal (dBm) Represents the signal level with which the device at the remote end receives frames,
through wireless medium.
Remote Noise (dBm) Represents the noise measured at the remote end antenna ports.
Remote SNR (dB) Represents the SNR measured by the receiver at the remote end and is based on the
Remote Signal and Remote Noise.
Current Tx Power
(dBm)

TPC: Displays the TPC value currently applied by the device to adjust the transmit
power radiated by the radio antenna.
: For a given data rate, if the configured TPC value is greater than the maximum
transmit power supported by the radio then maximum transmit power
supported by radio value is applied.

EIRP: Displays the current EIRP that a radio antenna radiates (after applying the TPC).

Power: Displays the current transmit power radiated by the radio (after applying the
TPC).
Parameter Description