Software Guide

Management
Tsunami
®
800 & 8000 Series - Software Management Guide 202
4. To update the device with Configuration Profile files, select Config Profile.

Based on the IP mode, configure either IPv4 or IPv6 address as TFTP Server address.

Enter the name of the Config Profile file (including the file extension) that has to be downloaded onto the device
in the File Name box.
Figure 6-10 Upgrade Configuration Profile via TFTP
5. If you are upgrading the device with Binary Configuration file then click Upgrade and then reboot the device, or click
Upgrade & Reboot.
6. If you are upgrading the device with Text Based Configuration file, click Upload and then click Apply.
7. If you are upgrading the device with Config profile file then click Upload and then reboot the device, or click Apply
& Reboot.
: It is recommended not to navigate away from the upgrade screen, while the upgrade is in progress.
6.2.5 Upgrade License
You can upgrade the license file on the device either through HTTP or TFTP. Refer
)      
'
    (       ( A  
section for
more details.
6.2.5.1 Upgrade License via HTTP
To upgrade the license using HTTP, do the following:
1. Navigate to MANAGEMENT > File Management > Upgrade License > HTTP.