User's Manual Part 1
Tsunami Multipoint Version 1.3 Installation Guide
About This Book
The Tsunami Multipoint Quick Install Guide, Installation Manual, and Reference Manual comprise the
Tsunami Multipoint Version 1.3 documentation set.
▪ The Quick Install provides just enough information for the experienced professional to install the
Tsunami Multipoint system.
▪ This document, the Installation Guide, provides detailed installation information for the less
experienced professional to install and initially configure the Tsunami Multipoint system.
▪ The Reference Manual provides conceptual, advanced configuration, and command reference
information about the Tsunami Multipoint system. See the Reference Manual for information about:
º Routing modes
º Active Interference Rejection (A.I.R.)
º Priority Queuing
º Advanced Configuration Options
º Command Reference
º Troubleshooting
Required Software and Firmware
The required software and firmware codes for this official release are:
▪ BSU Console Version 1.4 or Version 1.5
▪ Subscriber Utility 1.1 (packaged with Console V1.5)
▪ BSU Firmware Version 1.3 binary code, identified as PMP_BSU_release1-3.mot
▪ SU Firmware Version 1.3 binary code, identified as PMP_SU_release1-3.mot
About This Book 5
CPN 63179 Issue Date: 01/24/03