User's Manual Part 1

without prior written permission from Proxim Corporation.

The information contained in this manual is subject to change without notice. Proxim Corporation shall

not be liable for errors contained herein or for incidental or consequential damages in connection with the

furnishing, performance, or use of this manual or equipment supplied with this manual. Proxim

Corporation makes no warranty of any kind with regard to this manual or any equipment supplied with

this manual, including, but not limited to, the implied warranties of merchantability and fitness for a

particular purpose.

Tsunami™ is a registered product of Proxim Corporation.

Windows is a registered product of Microsoft Inc.

Other names are trademarks of their owners.

Y2K (Year 2000 Issue): All software supplied by and for Proxim Corporation products adhere to the four-

(4) digit year nomenclature as required for Year 2000 compliance.

Regulatory Notice

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC

regulations.

Changes or modifications not expressly approved in writing by Proxim Corporation may void the user's

authority to operate this equipment.

This device complies with RSS-210 of Industry Canada. Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

WARNING! This device must be professionally installed!