Software Guide

Management
Tsunami
®
800 & 8000 Series - Software Management Guide 203
Figure 6-11 Upgrade License via HTTP
2. In the HTTP screen, click Browse to locate the license upgrade(.bin) file to be loaded on the device.
3. Click Upgrade button to upgrade the license on the device and then reboot the device.
6.2.5.2 Upgrade License via TFTP
To upgrade the license file using TFTP Server, do the following:
1. Navigate to MANAGEMENT > File Management > Update License > TFTP.
Figure 6-12 Upgrade License via TFTP
2. Based on the IP mode, configure either IPv4 or IPv6 address as TFTP Server address.
3. Enter the name of the file (including the file extension) that has to be loaded on the device, in the File Name box.
4. Click Upgrade button to upgrade the license on the device and then reboot the device.
:

Upgrade license can be done through CLI/Web Interface/SNMP.

It is applicable only to MP-820-BSU-100, MP-820-SUA-50
+
, MP-825-SUR-50
+
, and QB-825-LNK-50
+
devices.