Operation Manual

108
Digital Video Recorder User Manual
Q9: when DVR starts, it displays “please wait…”all the time
First option: hard-disk data cable is causing the problem.
Solution: shut down and unplug the DVR from the power, check the cables connected to the hard-disk are connected. If this does
not solve the problem try using different cables.
The second possible reason: DVR is forced to stop because hard disk has disabled track which causes the system checking hard
while the disk cannot skip. Solution: Change another new hard disk or reformat the HDD.
Q10: How to input password and digital numbers
The method to input password and digital numbers is to click the password box, and thenavirtual keyboard will appear. Select the
desired character (the initial password is 123456).To add the password,use the digital keys in the front panel or the digital keys on
the remote controller.
Q11: Why isthe hard disk used in a DVR identified as a new hard disk if directly used to another same type DVR? And why
must we format it again?
When DVR only uses one hard disk, the hard disk removed from one to another same type DVR can work normally without
format.However, when a DVRadds to a new hard disk, it will identify the hard disk as a new one and inquire whether to format no
matter whether this hard disk used or not in another same type DVR before. In this condition, it can be used normally after
formatted according to the guide; if two or more hard disks used in different DVRs, when used in another DVR with the same type,
they will be identified to be two or more new hard disks, and all of them need to format.In general, please do not try using disks
removed from a different DVR because the data may be lost.