Operation Manual

49
Digital Video Recorder User Manual
Next: click Area button, a dialog box will pop-up as Fig
4-24 a and 4-24b.
To set the sensitivity value (1-8)drag the slide bar in the
Area interface, the default value is 6. The higher the
value the higher the sensitivity to movement, meaning
more events will be recorded. Due to the sensitivity is
influenced by color and time (day or night), adjust its
value according to the practical conditions; click icon,
set the whole area as detection area; click icon, the
set detection area will be cleared; click icon, user
can test if the sensitivity value and motion area are
suitable accordingly（refer to following picture）; Click
icon, to save the setting; click icon, exit
current interface.
Note: to set the area drag the mouse to the desired
detection area, click icon to clear all set
detection area firstly, and only thenset the area.
Fig 4-24 motion-area
Fig 4-24b motion-area