Operation Manual

52
Digital Video Recorder User Manual
4.5.5 Alarm out
Alarm out includes three sub menus: alarm out,schedule and buzzer
• Alarm out
System configuration =>alarm out; refer to Fig 4-28: You can set relay alarm
out name and select hold time (the interval time between the two adjacent
alarms).
To setup all channels with the same parameters choose“all”then apply to
save relevant setup to all channels.
Reset default setting; click the“default” button and then“apply” button to
save the setting.Pressthe “exit” button to exit current interface.
Fig 4-28 system configuration-alarm out
• Schedule
Configuration =>schedule;the setup steps of alarm out schedule are similar to those in4.4.1
Note: the default schedule of motion detection is set to always on: the color in the schedule is blue.
• Buzzer
Configuration =>buzzer;mark Buzzer and set buzzer alarm hold time.