Operation Manual

47
Digital Video Recorder User Manual
Fig 4-20 alarm handling-triggerFig 4-21 alarm
configuration-sensor-alarm handling
Full screen alarm: when alarm is triggered, there will pop up full screen alarm;
Email: Select this function. When an alarm is triggered, a notificationemail will be sent to thedesignatedemail box including
trigger events, time, snap pictures, device name, ID camera name etc.
Snap (for NE or HD series): Select channels. When an alarm is trigged, the system will automatically save the captured
pictures from the selected channel. If user activates the Email function, these pictures will also be sent to the designated email.
To alarm out: After selecting the channel, there will be triggered alarm out in the designated channel. Click OK button to save
the setting; click Exit button to exit the current interface.
To record: Select recoding channels. It will record the camera when alarm is triggered. Click OK button to save the setting; click
Exit button to exit the current interface.
To P.T.Z: set linked preset and cruise for alarm. User can select any channel or multi channels as linked channels. Click OK
button to save the setting; click Exit button to exit the current interface.
To setup all channels with the same parameters mark“all”then apply to save relevant setup to all channels.
Reset default setting; click the“default” button and then“apply” button to save the setting.Pressthe “exit” button to exit current
interface