Operation Manual

39
Digital Video Recorder User Manual
Click button to set the next channel group.
Step5: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
interface.
4.2.3 Spot
Step1: enter into system configurationlive configurationSpot; refer to Fig 4-9:
Step2: select split mode: 1×1and channel
Step3: dwell time: the time interval for a certain dwell
picture display switching to next dwell picturedisplay
Step4: select the split mode and then setup current
picture group. Click button to setup the previous
channel groups of dwell picture. Click button to set
the latter channel groups of dwell picture.
Reset default setting; click the“default” button and
then“apply” button to save the setting.Pressthe “exit”
button to exit current interface.
Fig 4-9 live configuration-Spot
4.2.4 Mask
You can add up to three privacy mask areas on the live
image picture, to block view and recording.
Setup mask area: click setting button, enter live image
and press left mouse tocreate or move a privacy mask,
refer to the picture on the next page. Pressthe "Apply"
button to save your setting.
Delete mask area: double click on the mask area you
want to delete. Click Apply button to save the setting.
Fig 4-10 live configuration-mask