Operation Manual

8
Digital Video Recorder User Manual
2.1.5 Install the DVD Writer(2U DVR case)
Step 1: Unscrew and open the case. Then unscrew the screws on both sides to remove the upper bar as shown below:
Step 2: Install the DVD holder that came with the device. Please let the screw holes of the DVD aim and the bolts. Try to place the
holder farther away from the front and then screw firmly. Then, put the DVD with the holder into the case and let the screw holes of
the case aim at the holder’s. Next, tighten the bolts firmly.
Step 3: Connect the power and data cables and install the upper iron bar. Then, screw firmly with screws in the both sides.
Note: The DVD installation uses a space that could be used to install a hard drive.