User Guide

www.promounts.com

Universal Tilt Mount for 24” to 46” flat panels

The UT-PRO200 universal tilt mount is designed for medium sized flat panel displays

up to 100lbs (45.4kg). The adjustable tilt range is from 0 to 20 degrees and is fixed

in place with a ratchet handle that allows tilt adjustment even when in place on the

wall. Wall attachment is to two wood studs 16” or further apart or concrete.

 A very slim design only 2” deep yet still allowing ample room for cables

 Universal design; no additional panel adapter needed

 One piece mounting plate with large openings for cable access and J boxes

 VESA compliant: 75, 100, 200, 200 x 100

 All panel and wall mounting hardware included

 Includes security hardware and accepts padlocks

 Manufacturer’s limited lifetime warranty

UT-PRO210

PAGE 1
www.promounts.com UT-PRO210 Universal Tilt Mount for 24” to 46” flat panels The UT-PRO200 universal tilt mount is designed for medium sized flat panel displays up to 100lbs (45.4kg). The adjustable tilt range is from 0 to 20 degrees and is fixed in place with a ratchet handle that allows tilt adjustment even when in place on the wall. Wall attachment is to two wood studs 16” or further apart or concrete.
PAGE 2
UT-PRO210 Specifications Fits most flat panels between 24” and 46” Horizontal hole spacing: max 18” (457mm) Vertical hole spacing from 2.5” to 15.4” (64mm to 391mm) Tilt: 0 to 20 degrees VESA compliant: 75, 100, 200, 200 x 100 Weight 12.1lbs (5.5kg) Post Assembly Adjustment Horizontal L or R from center: 75 VESA: up to 8” (204mm) 100 VESA: up to 7.5” (191mm) 200 VESA: up to 5.5” (140mm) Vertical: 2.5” (64mm) Wall Mounting Dual (2) wood studs up to 18” apart or concrete Dimensions 8.3”w x 21.5”d x 2.