Installation Instructions

CT-PRO210

User’s Manual

Up to 60 lbs / 27.2 kg

For more information, visit:

www.promounts.com

Promounts

name, logo and model

numbers are property of Promounts.

Disclaimer

Promounts intends to make this manual accurate and complete, however, Promounts makes no claim that the information contained

herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation

or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.

Promounts makes no representation of warranty, expressed or implied, regarding the information contained herein. Promounts

assumes no responsibility for accuracy, completeness or suciency of the information contained in this document.

Warnings & Cautions

IT IS HIGHLY RECOMMENDED THAT THIS PRODUCT BE INSTALLED BY A PROFESSIONAL.

PLEASE REVIEW THIS INSTRUCTION MANUAL COMPLETELY BEFORE STARTING THE INSTALLATION PROCESS.

WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding

instruction.

WARNING: Improper installation can result in serious personal injury! Make sure that the structural members can support a weight

factor ve times the total weight of the equipment. If not, reinforce the structure before starting the installation.

WARNING: Be aware also of the potential for personal injury or damage to the unit if it is not adequately mounted.

WARNING: The installer is responsible for verifying that the wall or ceiling to which the mount is anchored will safely support the

combined load of all attached components or other equipment.

WARNING: The weight of the display placed on the mount must not exceed the maximum load capacity of the mounts.

WARNING: Watch for pinch points. Do not put your ngers between movable parts.

WARNING: Make sure the mount and brackets are correctly oriented.

CAUTION: Check the unit for shipping damage before you begin the installation.

You Will Need

A. Bubble level

C. Marker

D. Drill

E. 1/4” drill bit

F. Hammer

G. Wrench

PAGE 1
CT-PRO210 User’s Manual Up to 60 lbs / 27.2 kg You Will Need A. C. D. E. F. G. Bubble level Marker Drill 1/4” drill bit Hammer Wrench Disclaimer Promounts intends to make this manual accurate and complete, however, Promounts makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
PAGE 2
1. Installl fixtures on to ceiling board 2. Secure ceiling plate (A) on to wire hook (B), and adjust the tilt screw (E) to make ceiling plate keep balance. 3.