Product manual

VTrak E-Class Product Manual
32
Figure 15.FC SAN NSPF data connections
The VTrak RAID subsystem is shown with SFP transceivers installed.
Management Path
To establish the management path:
1. Connect an Ethernet cable between the Management port on each RAID
controller and the network switch.
See page 33, Figure 16.
2. Connect an Ethernet cable between the network port on each host PC or
server and the network switch.
115200 8 N 1
SAS IN SAS OUT
115200 8 N 1
SAS IN SAS OUT
RAID controller 1 connects to:
• Both FC switches
• One JBOD I/O module
Each RAID HBA card connects
to both FC switches
Each FC switch connects to:
• Both Host PCs
• Both RAID subsystems
RAID controller 2 connects to:
• Both FC switches
• The other JBOD I/O module
VTrak JBOD unit
VTrak RAID
subsystem