Product manual

Chapter 5: Management with the CLU

297

Making Telnet Settings

By default, Telnet service is set to Automatic and its normal status is Started.

To make Telnet service settings:

1. From the Main Menu, highlight Additional Info and Management and press

Enter.

2. Highlight Software Management and press Enter.

3. Highlight Telnet and press Enter.

4. Highlight Startup Type and press the spacebar to toggle between

Automatic and Manual.

5. Highlight the following and press the backspace key to erase the current

value, then type the new value:

• Port number (2300 is the default)

• Session Time Out (24 minutes is the default. 1440 minutes = 24 hours)

• Maximum number of connections (4 is the default)

6. Press Control-A to save your settings.

To start, stop or restart the Telnet service, highlight Start, Stop, or Restart and

press Enter.

Making SSH Settings

By default, Secure Shell (SSH) service is set to Automatic and its normal status is

Started.

To make SSH settings: