Specifications
~rule
a xylem brand
4of
MarineEast
59
PUMPS & PLUMBING
For more information see www.xylemflowcontrol.com
For more information see www.marineeast.com
EXHAUST PORTS
•
Designed for engines with water cooled exhaust systems
•
Optional flap for secure seal
•
Molded in nylon (S.T. 801)
PLUMBING FITTINGS
LOPRO SERIES 900D
LOW PROFILE HIGH CAPACITY BILGE PUMP
Designed to bring pumping power to tight spaces.
Rule’s LoPro Series Bilge Pumps are only 2.25” high, but can move a mighty
900 gallons per hour. Each one features a threaded discharge nozzle with straight
and 90˚ fittings, and the body can swivel up to 180°, making it a great fit for small
spaces and odd configurations.
•
900 gallon per hour capacity – The 900D can move a colossal 900 gallons
of water per hour, even though it has an extremely low profile.
•
Fully rotating discharge body – The entire body swivels up to 180°,
making the pump extremely easy to install.
•
Threaded discharge nozzle – The threads allow the discharge nozzle to couple
with either a staight or 90˚ fitting, both of which are included. An included
tricuspid check valve, used with the straight fitting, can be used to minimize the
backflow of water.
•
Horizontal or vertical mounting – The 900D features a variety of mounting
options to accommodate the boat’s design.
•
12V DC operation – The pump operates on standard marine electrical power
while delivering high capacity pumping power.
LOPRO SERIES 900S
FULLY AUTOMATIC LOW PROFILE BILGE PUMP
Designed to bring automatic pumping power to tight spaces.
Rule’s LoPro Series Bilge Pumps are only 2.25” high. Yet each one can move a mighty
900 gallons per hour. In addition, the 900S model features two automatic modes.
The first one engages the pump when the water level reaches 1.3" or 2", and the
second one checks for water by briefly turning on the pump every 2.5 minutes.
•
Fully rotating discharge body – The entire body swivels up to 180˚,
making the pump extremely easy to install.
•
Threaded discharge nozzle – The threads allow the discharge nozzle to couple
with either a staight or 90˚ fitting, both of which are included.
An included tricuspid check valve, used with the straight fitting, can be used to
minimize the backflow of water.
•
Multiple modes of operation – In addition to manual, the 900S features
two automated modes of operation.
•
Electronic automatic mode – The pump automatically turns on every 2.5 minutes
to check for water, and if it’s detected the pump stays on until the water is gone.
•
High or low water sensing mode – The low setting automatically starts the pump
when the water level rises to 1.3", and the high setting engages the pump when the
water rises to 2".
•
Horizontal or vertical mounting – The 900S features a variety of mounting
options to accommodate the boat’s design.
ORDER NO.
Mfr. No.
Description
732-81000 8100 Exhaust Port, 3", Black
732-81040 8104 Exhaust Port, 4", Black
732-81170 8117 3 or 4" Exhaust Port Flap
732-81180 8118 3 or 4" Exhaust Port Split Pin
732-81000
New
Size
SPECIFICATIONS:
Voltage:
12 VDC
Flow:
900 GPH open flow at 13.6V
Amp Draw:
4A approximate
Protection:
TCO
Port Configuration: 3/4", 1", 1-1/8" Straight,
90˚ 3/4"
Backflow preventer valve can be used with
straight fittings
Dimensions:
2.3"H x 9.3"L x 2.3"W
SPECIFICATIONS:
Voltage:
12 VDC
Flow:
900 GPH open flow at 13.6V
Amp Draw:
4A approximate
Protection:
TCO
Port Configuration: 3/4", 1", 1-1/8" Straight,
90˚ 3/4"
Backflow preventer valve can be used with
straight fittings
Dimensions:
2.3"H x 7.6"L x 2.3"W
BILGE PUMPS – LoPro Series
ORDER NO. Mfr. No.
272-09001 LP900S
ORDER NO. Mfr. No.
272-09002 LP900D