Specification Sheet

Pr
o
Mariner
T
M
Fully Automatic Charging
Charge, condition & maintain batteries with a built-in safe maintenance mode.
Single Preset Charging Profile
Use with Lead Acid (Flooded) or GEL batteries.
Expanded LED Status Center
At-a-glance AC power, charging and ready / maintain LED indicators.
Distributed-On-Demand
™
Technology
Automatically charges & maintains your engine crank battery while
distributing all remaining charging amps to trolling motor batterie(s).
Built-in Quality & Safety
100% epoxy filled - Completely waterproof & shockproof.
Dual in line DC safety fuses (multi-bank models),
reverse polarity, ignition and temperature protection.
Pre-Wired for Easy Installation
2 Year Warranty
Note: Not for use with AGM (Absorbed Glass Matt) or 4D or 8D large capacity batteries
5 Amp Single Bank Model: 31405
Max. Batteries: 1
Ideal Use: Single 12V engine
crank battery
or
Single 12V trolling
motor battery
DC Output: Single 12V output
at 5 Amps Max.
AC Input: 115 VAC / 60Hz
Cable Length: 6’ AC and DC
Professional Mariner, LLC 200 International Drive, STE 195 Portsmouth, New Hampshire 03801 | ph: 603.433.4440 fax: [phone] | www.promariner.com
090712A
specifications subject to change without notice
1
Pro
o
Recreational Marine Battery Charger
Series
D
Distributed-on-Demand
Technology
2
Digital
ProMar
Performance Charging Inside
SALTWATER
WATERPROOF &
TESTED
100%
Single, Dual & Triple Bank
3 Models
Available in
New!
5/5 10 Amp Dual Bank Model: 31410
Max. Batteries: 2
Ideal Use: Single 12V engine
crank battery
+
One 12V trolling
motor battery
(for 12V trolling motor)
DC Output: Dual 12V output at 10 amps
maximum fully distributed
AC Input: 115 VAC / 60Hz
Cable Length: 6’ AC and DC
12V 12V
12V
5/5/3 13 Amp Triple Bank Model: 31413
Max. Batteries: 3
Ideal Use: Single 12V engine
crank battery
+
Two 12V trolling
motor battery
(for 24V trolling motor)
DC Output: Triple 12V output at 13 amps
maximum fully distributed
AC Input: 115 VAC / 60Hz
Cable Length: 6’ AC and DC
12V 12V 12V