Use and Care Manual

- 8 -
OPERATION INSTRUCTIONS
USING YOUR PROLUX CORE FLOOR BUFFER
Once you have the unit assembled, and the correct pads installed you are now ready to use your
Prolux Core.
1. Clear the floor of furniture and other objects.
2. Examine your scrub brush or polishing pad that you are going to use for cleanliness. (Clean or
remove debris if needed.)
3. Move to the back corner of the room away from the entrance to begin the cleaning process.
4. Apply buffing solution or polishing cream on the pad or directly on the floor.
5. Adjust the telescopic handle until it’s at a comfortable working height.
6. Using either foot, push down on the pivot release pedal. This will make the handle fall towards you.
7. Once plugged in a red light will illuminate on the on/off switch. When ready, grasp the handles
firmly and turn the buffer on with the conveniently placed on/off switch.
8. Unlike traditional floor buffers you don’t need to push down or lift on the handle to move it. The
Prolux Core is easily maneuverable by simply moving it side to side.
WARNING
To reduce the risk of electric shock, the power cord must be unplugged before
removing the cleaning pads, or performing maintenance or trouble shooting.