Specification Sheet

Distributed Exclusively by Ferguson and Wolseley Canada
© 2015 Ferguson Enterprises, Inc. 0115 24183
Product Features
• ADA & UFAS Compliant
• No tools required contractor friendly Tear-To-Fit feature makes trimming fast
• Universal design fits virtually all lavatory applications
• Smooth, flush SnapClip
TM
fasteners firmly secure piping covers in place and
are nonabrassive and reusable
• Antimicrobial vinyl maintain sanitary conditions
• Lock Lid
TM
on valve stops tampering and allows service
• Cleanout nut cap allows service on trap without disassembly
• Internal ribs enhance K valve and soften impact cushioning
• Fire retardant
PF201WH
Trap Covers
PF200 Series
Product Specifications
New E-Z Tear-To-Fit feature and E-Z Grip built-in fasteners make
installation fast and easy!
1. Tear-To-Fit on internal, dimensioned tear lines for quick, clean, accurate
trimming to fit virtually any piping configuration. Covers flex to install
over pipes.
2. Press seams together at finger recesses to engage E-Z Grip internal
fasteners for a secure, safe, tamper-resistant installation. To remove
cover, firmly pull seam apart using a strong grip. To reinstall, press
seams back together.
Model Numbers
Warranty and Codes
This PROFLO product carries a 1-year limited warranty. This product meets ADA article 4.19.4; CABO/ANSI
4.20.4; UFAS 4.19.4; California Title 24; UPC/IAPMO ICC; Canada Barrier-Free Code. Made in USA.
PF200WH
PF201WH
PF202WH
PF203WH
PF205WH
PF299WH
PFEXT200WH
Material Soft, resilient molded vinyl
Nominal Wall 1/8” constant with internal ribs
Durometer 70-80 – Shore A
UV Protection Will not fade or discolor
Durability Virtually indestructible
Trimming E-Z Tear-To-Fit trim feature (no tools needed)
Fasteners Internal E-Z Grip fasteners, reusable
Color China white
Compatibility Fits all 1-1/4” or 1-1/2” cast brass or tubular P-trap
assemblies and 3/8” or 1/2” angle stop assemblies
Paintability Apply latex paint
Burning Characteristics
ASTM D-635
Self extinguished 0 sec (ATB) mm (AEB)
Bacterial/Fungus
Resistance
ASTM G21 and G22 – Result: 0 growth
Maintenance Wipe clean using common detergents
PF200WH
one P-trap cover
PF201WH
one P-trap cover, one angle valve and supply
cover
PF202WH one P-trap cover, two angle valves and supply covers
PF203WH one P-trap cover, two angle valves and supply
covers, one 5” offset tailpiece wheelchair strainer
cover
PF299WH one angle valve and supply cover
ACCESSORIES
PF205WH one 5” offset tailpiece wheelchair strainer assembly
EXTENSIONS
PFEXT200WH one 16” extension for drain waste or tailpiece