4
TEST INSTRUMENTS MT-8100 Butt Set Drop Protection Rugged Dustproof Mark for products are complied with IEC/EN 60529 IP54 Dustproof & Waterproof tests Line Voltage test Polarity LED Indicator 2 KΩ maximum at 48 VDC (nominal 20 mA minimum loop current) DC resistance ELECTRICAL PLIERS & CUTTERS Voltage Test Waterproof Electrical Line Continuity Test Talk mode 300Ω typical Monitor impedance 39kΩ nominal at 1 kHz CRIMPERS Loop limit PRECISION PLIERS & CUTTERS Exterior KNIVES & SCISSORS Featur
Rests easily on shoulder Polarity LED indications Electrical Loop limit Talk mode 300Ω typical Monitor impedance 39kΩ nominal at 1 kHz Rotary dial output Angled bed of Nails Pulsing rate 10pps+0.8pps Percent break 61%±2% Interdigit interval 1000 ms typical Leakage during break >50 kΩ DTMF output Tone frequency error ±1.
LCD display, Talk/Monitor, Polarity indication, Power saving, Hands-Free Features: • LCD display for dialing number, Caller ID, Clock and other information • Smart power saving enables battery life up to 6 months • 12 phone number memory for speed dialing • 16 dialing number memories Telephone line • Tone (DTMF) and pulse operation polarity indication • Up to 32 digits phone number memory for speed dialing key • Pre-dialing and last number redial function • PBX pause key, insert a PBX pause in stored number
TEST INSTRUMENTS PRECISION PLIERS & CUTTERS All-in-One Toner & Probe Kit VDV Tester (Voice/Data/Video) Features: • Validate and troubleshoot wiring on RJ11/RJ45 cables, USB, F, BNC and RCA connectors. • Detects telephone and Ethernet service, indicates polarity and active line numbers on voice circuits, and active pair number on Ethernet circuits • Ideal for all maintenance fields of telecommunication, networking, datacom, Audio/Video, Cable TV and all weather cabling, etc...
Features: Indicator LCD 53X25mm,with back light Tone frequency 225kHz Max. distance of transmission 2km Max. distance of cable map 300m Max. working current ≦70mA Tone mode 9 Tone adjustable Compatible connectors RJ45(8 pin)、RJ11(6 pin)、BNC、 USB、IEEE 1394 Continuity test LCD (SHORT) Max. signal voltage 1.
RJ45, RJ-11/RJ-12, BNC cable tester, Voltage detector BNC connector ELECTRICAL PLIERS & CUTTERS Features: • Complies with CE safety standard • Automatically detect good connections, opens, crossed wires & split pairs • Test RJ45 TIA568A/B (AT&T) 258A), 10 Base-T, Token ring, RJ-11/RJ-12 USOC and coaxial BNC cable • Pin to pin cable map indicator • Voltage detection for user safety • Main unit and remote allow one person operation • Compact size and lightweight design for easy to carry around • Circuit pro
Individual packing: Inner box & Color label shrink MT-7056 Lan Cable Tester Features: • Scans for continuity, open, short as well as reversal and crossed wiring. • Features with Auto or Manual scans for pin-out indicators. • Built-in tone generator for cable tracing & identification. • The remote terminator can be used to test the existing cable installations. • Patch panel and wall plates can also be easily tested with the RJ45 adapter cable.
Features: • Tests RJ45 TIA568A/B (AT&T 258A), 10 Base-T, Token ring, RJ-11/ RJ-12 USOC and Coaxial BNC cable. • Automatically check cable for continuity, short, open and crossed wire pairs. • Coaxial cable port indentifies cable conditions including shorts, shield opens and center conductor breaks. • Main unit and remote allow one person testing.
Test Instruments Maximum display range and accuracy for digital multimeters and digital clamp meters and environmental meters Resistance Indicates the least significant digit. It represents the error used for processing fractions when converting from analog to digital. Display 4000k 4.000M 4000 4.000k 40 40.
14
TEST INSTRUMENTS PC Link System Specification DCV 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+4d) ACV 6/60/600V ±(0.8%+10d), 750V ±(1.0%+6d) DCA 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) ACA 60m/600mA ± (1.5%+10d), 6/10A ±(2.5%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 10/100/1000/10k/100k/1M/20MHz ±(0.3%+2d) Capacitance 40nF ±(5%+30d), 400n/4μ/40μF ±(3.5%+8d), 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.
Capacitance Inductance Resistance LCR meter is a easy way to measure and analyze inductance (L), capacitance (C), and resistance (R) of passive components and materials accurately. Measured values can be easily read from large LCD display. MT-5210 LCR meter is also provided with a transistor test to check their functionality. Both continuity and diode test are part of the multiple functions of this LCR meter.
3 in 1 for RJ-11 line test, RJ-45 cable test and DMM functions CAT III 600V CAT II 1000V ACV 200mV ±(1.2%+3d), 2/20/200V ±(0.8%+3d) , 700V ±(1.2%+5d) DCA 200μ/2m/20mA ±(0.8%+3d) , 200mA ±(1.5%+2d), 10A ±(2.0%+5d) ACA 200μ ±(2.0%+3d), 2m/20mA ±(1.0%+3d) , 200mA ±(1.8%+3d), 10A ±(3.0%+5d) Resistance 200Ω ±(0.8%+3d), 2k/20k/200k/2MΩ ±(0.8%+2d), 20MΩ ±(1.0%+2d) , 200MΩ ±(5.
TEST INSTRUMENTS KNIVES & SCISSORS Features: • Complies with newest CE safety standard • 3 3/4 digits 3999 counts • Large and easy to read display panel • Overload and resettable fuse protection circuit design • Extra function: Auto range, relative reference, backlight, data hold, auto power off, low battery indication CAT III 1000V Specification Test lead ELECTRICAL PLIERS & CUTTERS PRECISION PLIERS & CUTTERS MT-1217 3 3/4 Auto Range Digital Multimeter transistor test socket, thermocouple probe DC
Auto range, Frequency/Capacitance/Temperature/DMM All in 1. CAT III 600V DCV 400mV/4V/40V/400V ±(0.5%+4d), 600V ±(1.0%+4d) ACV 4V/40V/400V ±(0.8%+6d), 600V ±(1.0%+6d) DCA 400μA/4000μA ±(1.0%+10d), 40mA/400mA ±(1.0%+10d), 10A ±(1.2%+10d) ACA 400μA/4000μA ±(1.5%+10d), 40mA/400mA ±(1.5%+10d), 10A ±(2.5%+15d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400K ±(0.8%+4d), 4MΩ ±(0.8%+4d) 40MΩ (1.2%+10d) Frequency 1/10/100Hz ±(0.5%+10d), 1K/10K/100KHz ±(0.5%+10d), 1/10MHz ±(0.5%+10d) Capacitance 4nF ±(0.
STRIPPERS CRIMPERS KNIVES & SCISSORS ELECTRICAL PLIERS & CUTTERS Features: • 3 1/2 digits 1999 counts. • 0.5% best accuracy. • Extra function : backlight, data hold, auto power off, low battery Indication. Transistor hFE test MT-1132 CAT III 600V ALIGNMENT TOOL & SCREWDRIVERS HEX KEY WRENCHES 20 Specification DCV 200mV ±(0.5%+1d), 2/20/200V ±(1.0%+2d), 1000V ±(1.5%+2d) ACV 200mV ±(1.0%+3d), 2/20/200V ±(1.5%+3d), 750V ±(2.5%+4d) DCA 200μ/2m/20m/200mA ±(1.2%+2d), 10A ±(2.
Automatic Pocket Meter Auto-selection function, Non-contact ACV detector Hz Duty KNIVES & SCISSORS ELECTRICAL PLIERS & CUTTERS One Touch Features: • 3-3/4 digits 3999 counts. • 0.7% best accuracy. • Auto range. • Auto-selection ACV, DCV, Resistance. • Non-contact voltage detector of ACV. • Extra functions: auto power off,low battery indication. • Safety extras such as transient protection to 4 kV and overload protection to either 600 V. DCV 4/40/400V ±(0.7%+4d), 600V ±(0.8%+5d) ACV 4/40/400V ±(0.
CAT II 600V A Specification Features: • 3 3/4 digits 3999 counts • 1.0% best accuracy. • Auto range. • Overload protection. • Extra function: duty cycle, relative reference, data hold, sleep mode, auto power off, low battery indication. • Jaw Opening Size: max. 30mm ELECTRICAL PLIERS & CUTTERS KNIVES & SCISSORS AC / DC Measurement AC/DC current, Frequency, Capacitance measurement.
Specification 0.1/2.5/10/50/250V ±3.0%FSD, 1000V ±4.0%FSD Null DCV DC ±5V/±25V ±5.0%FSD ACV 10/50/250V ±4.0%FSD, 1000V±5.0%FSD DCA 50μ//2.5m/25m/250mA ±3.0%FSD, 10A ±4.0%FSD Resistance ×1(0.2~2kΩ)/ ×10(2~20kΩ)/ ×100(20~200kΩ)/ ×1k(200~2MΩ)/ ×10kΩ(2k~20MΩ) ±4.0%ARC Capacitance C1(R×1k): 2000μF(Approx.), C2(×50μA): 0.025μ/0.25μ/25μ ±3.0%FSD(Option MT-2007-C) Battery check 1.
ELECTRICAL PLIERS & CUTTERS Cover and wrist strap included Box MT-4015 Measure °C, °F, %RH(relative humidity), td (dew point temperature) Range -10~50°C, 14~122°F, 0~100%RH Accuracy ±1.0°C, ±1.8°F, ±3%RH (5~95%RH) Sample rate 1 time/sec. Resolution 0.1˚C, 0.1˚F ; 0.1%RH Power source AAA(1.5V) x 3pcs (Not Included) Size 130 x 60 x 30 mm Individual Packing Carrying Case + Color Box Features: • Top display, show the Velocity, 4 digits LCD display.
Microphone Electret condenser microphone Response frequency 31.5Hz~8KHz Frequency weighting A Type Range 30~60dB, 50~80dB, 70~100dB, 90~120dB Resolution 0.1 dB Accuracy 30~60dB ±3 dB; 60~120dB ±2 dB Time response Analog bar: 125ms ; Digital :750ms Power source AAA(1.
K Type Digital Thermometer Ideal For use in labs, industrial control and audits and measuring differential temperature T1/T2. ˚C REL ˚F MAX MIN Features: • Large LCD displays (LCD 18.2mm): 4 Digital liquid crystal display. • Dual K type probe input. • T1, T2 or T1-T2 dual channel display. • 10 set data memory function. • Function: ˚C/˚F selection, Max/Min reading, Data Hold, Relative reference, Memory, Limit, Hi/Lo, T1-T2 Type. • Extra function: Auto power off, Low battery indication.
TEST INSTRUMENTS NT-6556 Ultrasonic distance Meter with Laser Tape Save time, money & effort ELECTRICAL PLIERS & CUTTERS PRECISION PLIERS & CUTTERS Features: • Easily and quickly measure up to 50 feet. • Calculation of area and volume. • Measured data memory function. • Multi-length accumulation. • Auto converts feet to meters. • Auto power off. Specification: indoor Measurement range 2~50 feet (0.6 ~ 15 meters) Accuracy ±(0.5% +1digit) Resolutions 1’ (0.01m) Aperture angle Approx.
TEST INSTRUMENTS NT-303 Non-Contact Voltage Tester NT-305 Voltage Tester CRIMPERS KNIVES & SCISSORS ELECTRICAL PLIERS & CUTTERS PRECISION PLIERS & CUTTERS Material: ABS Circuit Continuity Test LED Indicator Black light Battery Compartment Induction Test Material: ABS Beeper Alarm Non-contact Display Panel Pen size design Screwdriver for battery replacement Features: • Contact - free electrical socket indication at AC voltages between 90V-240V • Clear alarm system: flashing LED with beeper ala
Connections: +++ EARTH CABLE CORE GUARD INSULATION LINE COVERING OUTER SHEATHING Specifications: • Test Voltage(Measuring): 500V DC(25GΩ), 1kV DC(50GΩ), 2.5kV DC(125 GΩ), 5kV DC(250 GΩ) • Accuracy: ±(5%+2d) • Battery: AA(1.5V)x8 (Alkaline Battery) (Not included) Individual packing: Color box With Guard Connected, Surface Leakage Current is eliminated by the Guard Test Lead. Therefore Eliminating Measurement error. • The result will be correct.
Features: • Two functions in one unit incluidng open phase and phase sequence. • Large size alligator clips : able to clip on switch-board terminals easily. • Identify 3 phase sequence and open phase check. • Ideal for installing conveyor lines, pump systems and interconnected drivers. • No exposed metal parts. Safety features are incorporated throughout, including the pushbutton switch designed to minimize damage due to negligence. • Safety approval: CE marks, IEN 1010 CAT. II.
