Installation Guide

AUTRACK4 Utility Truck Rack Assembly Manual

AUTRACK4

800 lb 4-POST ALUMINUM

UTILITY TRUCK RACK

INSTRUCTION MANUAL

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS

PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has

been made to ensure the accuracy of this manual. These instructions are not meant to cover

every possible condition and situation that may occur. We reserve the right to change this product

at any time without prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,

DO NOT OPERATE THIS PRODUCT!

QUESTIONS? PROBLEMS? CALL US FIRST!

If you experience a problem, have questions or need parts for this product, call Customer

Service at 1-636-532-9888, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the

sales receipt is required.

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR

FUTURE REFERENCE.

PAGE 1
AUTRACK4 800 lb 4-POST ALUMINUM UTILITY TRUCK RACK INSTRUCTION MANUAL READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur. We reserve the right to change this product at any time without prior notice.
PAGE 2
Technical Specifications 800-lb. load capacity Easy no-drill installation with basic hand tools No holes required in truck bed 4 load mounts/stops can be adjusted to secure your cargo Universal design fits both long and short bed pickup trucks and most makes and models Fully adjustable crossbars can fit any truck bed width up to 71in. Lightweight yet strong aluminum construction will never rust Zinc-plated hardware for maximum strength and durability Width of Bars: 1.
PAGE 3
Step 1 Slide triangular stop (3) into a mounting sleeve (4), tighten with M8*40 bolt (A) and M8 lock nut (B). Repeat until all 4 triangular stops are assembled. Step 2 Attach the assembled Cross Bar (6) to Post A (1). Secure with M10*25 bolt (C), 10 spring washer (E), 10 washer (I) and M10 locking nut (J). Make sure the lip of mounting foot of Post A (1) faces toward the inside of truck bed. (Fig.2) Step 3 Attach the assembled Cross Bar (6) to Post B (2).
PAGE 4
PARTS DIAGRAM 201707 AUTRACK4 Utility Truck Rack Assembly Manual 4