Item #XXXXXX Model #SW18030 BN USE AND CARE GUIDE CLARKSTON 44 INCH CEILING FAN 1-877-527-0313 HOMEDEPOT.
Table of Contents Assembly ....................................................................... 7 Hanging the Fan .................................................................... 7 Attaching the Fan Blades ...................................................... 10 Installing the Light Kit ........................................................... 10 Operation ......................................................................11 Care and Cleaning ....................................................
Warranty We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of 15 years after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware shown to actual size unless noted otherwise in the table below.
Pre-Installation (continued) PACKAGE CONTENTS C H D I E A F J B G Part Description Quantity A Blade 5 B Blade bracket 5 C Mounting bracket 1 D E Mounting plate (assembled with fan motor assembly) Fan motor assembly 1 F G Switch house cover (pre-assembled) Fan housing 1 1 1 H Light kit assembly 1 I J Glass shade 9W A19 LED Bulb 3 3 5 HOMEDEPOT.COM Please contact 1-877-527-0313 for further assistance.
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock, or personal injury, mount the fan to an outlet box marked acceptable for fan support using the screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly — Hanging the Fan 1 2 Installing the mounting bracket to the electrical box □ WARNING: To reduce the risk of fire, electric shock or other personal injury, mount the fan only to an outlet box or supporting system marked acceptable for fan support and use the mounting screws provided with the outlet box.
Assembly — Hanging the Fan (continued) 3 C D connect the ground wire from the mounting plate (D) to the ground wire from the mounting bracket (C) E 8
Assembly — Hanging the Fan (continued) 4 5 Attaching the fan motor assembly to the mounting bracket □ Remove one of the four screws (GG) on the mounting bracket (C) and loosen, but do not remove, the other three screws (GG). □ Remove the motor assembly (E) from the J hook. Finishing the fan installation □ Align the four large screwheads (HH) pre-locked on the fan housing (G) to the key holes (1) of the mounting bracket (C).
Assembly — Attaching the Fan Blades 6 Fastening the blade assemblies to the motor □ Attach the fan blades (A) to the blade bracket (B) using the blade screws (AA) and fiber washers (BB). Tighten the screws (AA) and fiber washer (BB) securely. E AA BB □ Fasten the blade bracket (B) to fan motor assembly (E) by using the blade bracket screws (CC). Tighten the screws (CC) securely. □ Repeat this procedure with the remaining blade assemblies.
Operation □ Attach the fan pull chain fob (EE) to the chain on the switch house of fan motor assembly (E), and attach the light kit pull chain fob (FF) to the chain on the light kit assembly (H). □ Turn on power and check the operation of your fan. The fan pull chain controls the fan speed as follows: 1 pull-High, 2 pulls-Medium, 3 pulls-Low and 4 pulls-Off. The light kit pull chain turns the light "ON" or "OFF".
Care and Cleaning Do Do not □ Check the support connections, brackets, and blade attachments twice a year. Ensure they are secure. Because of the fan’s natural movement, some connections may become loose over time. It is not necessary to remove the fan from the ceiling. □ Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing.
Service Parts AA G FF BB A H GG CC HH B I DD II C J D EE JJ E F Part Description Part Description A Blade AA Blade screw B Blade bracket BB Fiber washer C Mounting bracket CC Blade bracket screw D E Mounting plate Fan motor assembly DD Plastic wire nut EE Fan pull chain fob F G Switch house cover Fan housing FF Light kit pull chain fob GG Mounting plate screw H Light kit assembly HH Fan housing screw I J Glass shade 9W A19 LED Bulb II JJ Switch house cover screw
1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.