3 User Manual RevEAL Studio3 User Manual – April 2013 - Prism Projection, Inc.
Product Specifications and Warnings Please read this manual prior to use. • • • • • • This product is intended for professional use only. This product is designed for damp conditions, but is not suitable for wet locations. Due to risk of injury the safety cable MUST be attached while the product is suspended. The product requires the appropriate power supply. (90-264 VAC, 47-63 Hz) It is not intended for use on dimming circuits.
Step 2: After attaching the appropriate connector to the power cord you can attach the power cord to the fixture. The power cord will go into the power-in port. Slide the connector into the port and twist the connector clockwise. Step 3: Now that the unit has power you need to provide data to the unit. This is done by plugging in an approved 5 pin DMX cable. The data-in port is found on the rear of the fixture.
User Interface All connections, settings and control options are located on the rear of the fixture, as illustrated below. The Navigation Buttons can be used to access control settings and display fixture status on the Navigation Screen. Intensity or CCT Adjustment Knob Air Filter – Remove screws (4) to clean Navigation Buttons Power O Switch (Con LCD Menu Screen R36 Ethernet Jack DMX 5‐Pin In and Out PowerCon connector power in and out.
Home Screen The Home Screen displays the current fixture status including color temperature, intensity, DMX address, and number of DMX channels in use. The rotating fan symbol at the top right indicates the fan is working properly. Menu Screen The Menu Screen offers four options for control. Select Fixture Address, Channel Personality, Standalone Control, or TrueSource to advance to the desired control feature set.
Standalone Control Screen For operation without DMX or Art-Net in a standalone setting. Use this screen to adjust the intensity and in some fixture models the CCT value. Powering off the fixture from this screen will save the last fixture settings including intensity and color. TrueSource Screen This screen displays the CIE value of the color of the light being produced by the fixture.
RevEAL Studio3 DMX Chart Variable White Menu Settings: Channel Personality> Channel Personality> Channel Personality> Channel Personality> White (Full White, Variable White) Intensity (Linear, Standard) Advanced Settings > Energy (Full, Eco) Advanced Settings > Refresh Rate Advanced Settings > Algorithm Advanced Settings > Algorithm 1 2 Chan n n+1 Control Item CCT Intensity Default 0 0 Range 0, 255 0, 255 Function 2800K-5600K 0% - 100% 1 2 3 Chan n n+1 n+2 Control Item CCT CCT Intensity Default
RevEAL Studio3 DMX Chart Fixed White Menu Settings: Channel Personality> Channel Personality> Channel Personality> Channel Personality> White (Full White) Intensity (Linear, Standard) Advanced Settings > Energy (Full, Eco) Advanced Settings > Refresh Rate Advanced Settings > Algorithm 8 Bit 1 Chan n Control Item Intensity 8 Default 0 Range 0, 255 Function 0% - 100%
RevEAL Studio3 DMX Chart Variable White + Correction Menu Settings: Channel Personality> Channel Personality> Channel Personality> Channel Personality> White (Variable CCT, CCT + Correction) Intensity (Linear, Standard) Advanced Settings > Energy (Full, Eco) Advanced Settings > Refresh Rate Advanced Settings > Algorithm 1 Chan n Control Item CCT Default 0 Range 0, 255 2 3 n+1 n+2 Correction Intensity 127 0 0, 255 0, 255 1 2 Chan n n+1 Control Item CCT CCT Default 0 0 Range 0, 255 0, 255 3
RevEAL Studio3 DMX Chart Color + Variable White + Correction Menu Settings: Channel Personality> Channel Personality> Channel Personality> Channel Personality> Channel Personality> Color (X,Y) White (Variable CCT, CCT + Correction) Intensity (Linear, Standard) Advanced Settings > Energy (Full, Eco) Advanced Settings > Refresh Rate Advanced Settings > Algorithm 1 2 3 Chan n n+1 n+2 Control Item X Y CCT Default 0 0 0 Range 0, 255 0, 255 0, 255 4 5 n+3 n+4 Correction Intensity 127 0 0, 255 0, 255
Modes and DMX Channels Operating modes are set by using the button pad to navigate to the Personality and Fixture Address Menus. The menu allows the user to adjust; Color Mode, Color Temperature, Intensity (dimmer curve) and select Advanced Features such as power control. Remote power setting permits the user to control ECO and FULL power setting via DMX.
If CCT is at any value other than 0 and the Color Mode is any setting other than None, the instrument will ignore the color channels and only create white light. Moving the CCT channel to 0 will bump the instrument to wherever the color channels are set. If the Correction option is selected, a channel will be added following the CCT channel that allows for the adjustment of green and magenta in the CCT output. The Correction channel should be defaulted to 50% (127) for no correction.
Standalone Control Navigating to Standalone Control allows the user to create light without DMX present. To ensure there is no change in the light being produced it is recommended that DMX cables be removed while using standalone control. Use the up and down arrows to select the parameter to change, then use the left right arrows to change the parameter. Pressing the X button will return to the previous screen.
Prism Projection, Inc. 8228 East 124th Street South Sully, IA 50251 +1 (641) 594‐3356 info@prismprojection.com To receive an electronic copy of this user manual, please scan the QR code below.