/ \ Prism CARDSHARPER PENSACOLA 2 INSTRUCTIONS & INSTALLATION INFORMATION CONTENTS Section 1: Safety & Wakings Section 2: Warranty Section 3: Dimensions & Diagrams Section 4: Parts List Section 5: Gas Requirements Section 6: Set Up & Installation Section 7: Operation WARN | N G Section 8: Troubleshooting Read this material before using this product. Allure to do s can result In serious Injury.
SECTION 1: SAFETY & WARNINGS WARNING Do not store or use gasoline, or other flammable vapors and liquids, in the vicinity of this or any other appliance. WARNING FOR OUTDOOR USE ONLY WARNING POTENTIAL CARBON MONOXIDE HAZARD This appliance can produce carbon monoxide which has no odor. Using it in an enclosed space can kill you. Never use this appliance in an enclosed space such as a camper, tent, car, or home.
SECTION 2: WARRANTY Prism Cardsharper LLC offers a 2-year limited warranty against manufactured defects. Prism Cardsharper will replace product which has proven to be defective in workmanship and material. The buyer must provide proof of purchase date by the end user of product. Prism Cardsharper must have the opportunity to verify the alleged defect this may include a site visit to inspect product.
SECTION 3: DIMENSIONS & DIAGRAMS 2% zn SPECIFICATIONS Diameter Height Buber sire meter / 65.000 BTU Weight 125 bs. Fuel Source LP org ignition Key Valve Materials Glass fiber reinforced cement PARTS LIST PART NO. PART NAME Qn. 01 15" Diameter Buber Ring 1 02 18" Diameter Buber Plate 1 03 65,000 BTU Orifice 1 04 3/8" Male flared fitting 1 TOOLS REQUIRED 05 3/8" Flex ine hose 1 « Gloves 06 Key 1 « Screw Gun with #2 fillips head tip to remove packaging.
SECTION 5: GAS REQUIREMENTS Read this section before installation. It explains what you need to know about liquid propane & natural gas prior to setting up your fire feature. LIQUID PROPANE Your fire feature is not provided with a propane tank. You will need to provide one. Use the following specifications for purchasing your propane tank. SPECIFICATIONS The 2-b. propane gas supply cylinder is constructed and marked in accordance with the specifications for propane gas cylinders as required by the U.S.
SECTION 6: SETUP & INSTALLATION 1. Carefully place the fire bow! in the final designated area. 2. Your fire bow! will arrive with the boomer and boomer plate set in you unit. You will need to lift up the plate to access the gas inlet. Natural Gas Installation i. The gas line between the boomer and the gas valve located on the side of the fire bowl has already been connected at the factory. ii. You will then connect the flex line hose from the plumbed gas line to open gas valve.
SECTION 8: TROUBLESHOOTING WILL NOT LIGHT Possible Causes carnal gas line FIX + If new Install, may take several attempts to purge alr + Debris In gas line FX « Confirm gas line Is clear (Insulation, dirt, plastic, excessive pipe sealer, st) * Improper gas pressures FIX + Confirm proper ges pressure WILL NOT STAY LIT Possible Causes * Improper gas pressures FX + Confirm gas pressure + Improperly applied media FIX + Review operation of fire features In reference to decorative filler placement NOISE Possible
HOW TO SAFELY MOVE YOUR FIRE TABLE Remove unt from rats and claps on planetarium dolly * NEVER attempt to nova your new Firs Feature by yourself. * Wrap furniture blankets around the entire body of the unit to protect It against ‘textual and internal damage, and tape the blankets in place with quality tape. + Place a piece of plywood between the carpetbagger dolly and the fire unk for increased stability of the unit.
PRISM CARDSHARPER Outdoor Living Products We create visionary designs coupled with handcrafted processes. Prism Cardsharper is dependable, personalized products & services that capture your outdoor living area ideas down to the last detail. Before you break ground on a new project, you first need to consider your design preferences. That means leaning how to select the perfect colors, shapes and patterns to create an outdoor living space that not only fit your yard, but your lifestyle and vision.
