User's Manual

Configuring 3-15
using this submenu you can either enable or disable SNMP traps,
which are messages displayed in the right bottom corner of the main
window indicating that an action related to the AP took place.
Permitted messages are: Trap association -- This trap message is
sent when a Station’s association request is received from the AP –
Bridge.
Trap association: Indicates the reception of an association request
packet and the sender Station’s successful association with the
Wireless Bridge.
Trap Disassociation: This trap message is sent when
disassociation notification packet is received from a station.
Trap Reset: This trap message is sent when the AP-Bridge resets.
Trap Setting IP Address with Ping: This trap message is sent when
the AP-Bridge IP address is sent with the transmission of a ping
message.
Trap Start UP: This trap message is sent when Bridge starts up.
Trap Failed To Erase Flash: This trap message is sent when
Bridge fails to erase flash.
Setup->Authorization
● Authorization –
Using this submenu the Administrator can change the passwords
which referred to the community field for the User and the
Administrator Authority.