Owner`s manual
20 www.pridemobility.com Select Traveller
INITIAL ASSEMBLY
Your power chair may require some assembly either before initial use or after transportation. It may also require
disassembly to make some comfort adjustments. Figure 8 details those parts of the power chair that are designed
to be disassembled and assembled by an end user or by a qualified caregiver before using the product or making
comfort adjustments. There are two hex keys provided for use with controller installation and adjustment, and foot
platform adjustment.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert,
resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or
through your authorized Pride Provider.
IV. ASSEMBLY
Figure 8. Select Traveller Assembly View
BATTERY COVER
SEAT INSTALLATION
ARMREST WIDTH
ADJUSTMENT
CONTROLLER
POSITION
SEAT HEIGHT
ADJUSTMENT
BATTERIES
FOOT PLATFORM DEPTH ADJUSTMENT