User Manual

4 UC Surface Monitor Control Software

4.3 The Settings Page

Studio Series 1810c and 1824c

Owner’s Manual

4.3 The Settings Page

The Settings page allows you to conﬁgure your Studio-series. To open the

conﬁguration settings page, click on the Settings button in the upper right-hand

corner of the screen.

1. Show ADAT. This gives you the option to show your ADAT inputs in your UC

Surface Mixer. If you are not connecting external devices to your ADAT input,

you can turn this oﬀ to reduce the size of your monitor mixes and display just the

inputs you are using.

2. Peak Hold. Disables peak hold metering. By default, peak metering is active. To

change to peak hold metering, turn this control On.

3. Mixer Bypass. Bypasses UC Surface mixer and routing. While Mixer Bypass is

active, your Studio-series interface will function as a simple I/O device for your

DAW. When the mixer is bypassed, you must route audio to the desired output

using its dedicated playback stream both for system playback (if desired) and

DAW playback.

4. Color Scheme. This allows you to adjust the overall lightness or darkness of the

UC Surface Mixer.

5. Colorize Channels. You can select a custom color for just the channel name or

chose to color the entire channel strip.

6. Driver Settings. Displays the current driver settings for your Studio-series

interface. To change these settings, open the Launch window.

7. Version Info. Displays the current ﬁrmware and UC Surface version.