Specifications

PBC UNIVERSAL PROJECTOR MOUNT
Page - 11 - Installation Manual
Securing the Projector to the Upper Assembly
Step 1. Make sure the three-knurl knobs are loosened to fully expose to the “tri-lock” mounting plate in the base of the upper
assembly.
Step 2. Carefully lift the projector and insert the mounting bracket mating special tri-lock cutout into the mating portion of the upper
assembly.
Step 3. Once inserted rotate the projector and mounting bracket 180° and secure the rear safety knob first to prevent further rotation
of the bracket in the upper assembly.
Step 4. Tighten the remaining two tension knurl knobs until the mount becomes rigid. The safety knob should line up with the
alignment slot on the mounting bracket.
Figure 6. Low Profile Installation
The alignment slot
must be in direct
alignment with the
safety knob to lock
the mounting
bracket to the upper
assembly.
To secure the
mount, replace the
red safety knurl
knob with one (1)
M6 x 25 security
screw (supplied).
1
2
3
Universal Mount
Tri-Lock
Openin
g
Alignment Slot
Tension Knurl Knobs
Insert universal bracket
to the tri-lock, then
rotate the projector 180°
Projector
Follow the numbering sequence prior to securing
the projector to the upper assembly.