LCD Ceiling Mount Installation Manual

PRC

Installation Manual Page - 7 -

UFP-220 Adapter Plate (Optional Installation) Tension Adjustment

1. Attach the UFP-220 Adapter Plate to the back of the display

using the six (6) M4 x 10mm flat head screws.

2. Attach the PRC mounting plate to the back of the

UFP-220 using the four (4) M4 x 5 mm screws.

1. Swivel Adjustment – Use a ¾” wrench to tighten and

loosen the swivel adjustment.

2. Tilt Adjustment - Use a 14mm socket to tighten and

loosen the tilt adjustment.

3. After everything has been tightened and the orientation has

been determined, tighten the set screw using the supplied

M3 Allen wrench.

VESA 7 5

M4 x 5mmPhillip

Head Screws

M4 x 10mm Flat

Head Screws

UFP-220

M6 x 6mm Set

Screw

Sw i v e l Te n s i o n

Tilt Tension

Technical Specifications

All measurements are in inches (mm).