Product Guide

12
All pictures shown in this document are for illustration purpose only. Actual product features may vary due to product enhancement without notice.
PRODUCT GUIDE
–
GPW
Series
6 GENERAL FEATURES A10-B25
6.1 CANOPY VERSION
 BASIC SCOPE OF SUPPLY - The basic scope of supply of canopy version is:
- Monoblock
- No Fuel tank as Standard: base frame with bottom panel
- Base frame equipped with screwed feet that allows handling by forklift
- Basic four lifting points from base frame
- Lifting bridge with single Roof Lifting Point
- Control panel and Power panels***
- No Starting batteries as standard
- Exhaust Manifold Insulation
- Water temperature and lube oil pressure sensors(OWS)**
- Manual Oil Pump
- Tray ready to fit main options
**in case of MRS and MSP is not included
***Available five different basic machines configuration:
- ASP + 4P (only for A10 & A18)
- MSP + 4P (only for A10 & A18)
- MRS + GCB2
- ACP + GCB2
- MPP + GMB2 (from B10)
All additional equipment can be choose by optional according to the specific market
requirements and customers needs.
 MAIN FEATURES - GPW Enclosure is designed with the following features:
 The enclosure is designed with modular panels.
 The enclosure modular panels are made of zinc-plated sheet metal
 The enclosure modular panels are externally fastened with zinc-plated nuts, bolts, fastener,
and bolts.
 Enclosure doors equipped with zinc-plated hinges.
 The enclosure modular panels and base frame are treated and painted with epoxy powder
smooth finishing.
 The Air Inlet openings are created by a process that cut the metal part of the enclosure, them
an intake duct is add inside the enclosure. This allow to improve the waterproofing of the genset.
 The soundproofing material is polyester fibre with Class 1 / Bs2d0 fire reaction.
 Enclosure IP is IP23.