User's Manual
Table Of Contents
- Revision Record
- Table of Contents
- List of Figures
- List of Tables
- Abbreviations
- Chapter 1 Product Description
- Introduction
- Scope of Manual
- Safety
- Warning Signs
- Human Exposure of RF Radiation
- Radiation Safety Distances
- Electrostatic Discharge (ESD)
- Sub Unit Overview
- Wideband Amplifier PCBA (WBA)
- Power Amplifier PCBA (PA)
- Multi-Carrier Power Amplifier PCBA (MCPA)
- Booster Amplifier PCBA (BA)
- Distribution PCBA (DIA)
- Control Unit PCBA (CU)
- Low Noise Amplifier (LNA)
- Duplex Filter (DPX)
- Fiber Optic Unit (FOU)
- Fiber Optic Node (FON)
- Power Supply Unit (PSU)
- Remote Control Unit (RCU)
- Alarm Interface PCBA (ALI) and Remote Control Interface PCBA (RCI)
- Sub Unit Locations
- Fiber Optic Distribution Networks
- Multi-Operator Configurations
- Chapter 2 Controls, Indicators and Connectors
- Chapter 3 Installation
- Chapter 4 Maintenance
- Chapter 5 Specifications
- Appendix A Block Diagrams
044-05251 Rev A 5-1
Chapter 5
Specifications
Introduction
This chapter provides specifications for the different WRH product line.
Table 5-1 WRH Specifications
Generic
Dimensions (W x H x D in inches) 17.5 x 21 x 7 (low cover)
17.5 x 21 x 11 (high cover)
Weight
Empty low cover
Cabinet with a low cover
Cabinet with a high cover
Equipped cabinet or high cover w/extra heat sink
element
13 lbs (6.0 kg)
50 lbs (22.5 kg)
96lbs (44.0 kg)
41 lbs (18.5 kg)
Temperature range -13 to +131°F (-25 to + 55°C)
Casing class NEMA4/IP65
Fiber-Optic Link Budget 10dBo
Amplifiers in 1 cabinet Standard = 2 (WBA / PA combination)
High Power = 1(WBA / MCPA combination)
Receiver input port return loss 14dB
Power supply voltage (default) 115 VAC
Power consumption 160 W (standard WRH)
210 W typical, 250 W max (WRH-V)
Fiber Optics
Bandwidth @ 3dB 800 – 2200 Mz
Power Consumption, total <5 W
Wavelength TX: DFB 1310 or 1550 nm
RX: 1250 – 1600 nm
Transmitter
Max continuous RF input
Optical output power, two levels
RF attenuation settable by SW in 1dB steps
+36dBm
+3 or 0dBm
0-20dB
Reciever
Max optic power input
RF attenuation settable by SW in 1dB steps
Alarm threshold level, settable warning
Alarm threshold level, settable error
+5dBm
0-20dB
0-40dBm
0-40dBm