Operation Manual

POWXG3025 EN
Copyright © 2015 VARO P a g e | 3 www.varo.com
LONG REACH 3-IN-1 COMBI: BRUSH CUTTER, GRASS
TRIMMER, HEDGE TRIMMER 33CC
POWXG3025
1 APPLICATION
This appliance is designed for the following applications:
Brush cutter (when fitted with metal circular blade): The brush cutter is intended to cut
weed and climbing plants. Do not use it for other purposes, never use it for
cutting wood. Never cut objects with a diameter exceeding 13 mm.
Grass trimmer (when fitted with nylon line cutting head): The grass trimmer is intended for
trimming grass. Do not use it for other purposes.
Hedge trimmer (when fitted with reciprocating blade): The trimmer is intended to be used
for trimming hedges and bushes with diameter not more than 24 mm.
Do not use this appliance for other purpose than those described in this manual.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your tool should only be
passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1. Trimmer head
2. Top protecting cap
3. Gear box
4. Fixing plate
5. Cutting attachment guard
6. Front drive shaft tube
7. Lock pin
8. Lock knob
9. Connector
10. Barrier
11. Front handle
12. Rear drive shaft tube
13. Engine switch
14. Throttle lock
15. Throttle trigger lockout
16. Auxiliary handle
17. Suspension ring
18. Output flange
19. Spark plug
20. Engine
21. Starter handle
22. Fuel tank
23. Choke knob
24. Primer bulb
25. Filter cover
26. Throttle trigger
27. Locking nut
28. Bottom Protecting cap
29. Bottom clamping plate
30. Metal blade
31. Top clamping plate
32. Carrying belt
33. Blade cover
34. Cutting blade
35. Grease nozzle
36. Transmission
37. Locking lever
38. Grip
39. Safety lever
40. Gear box
3 PACKAGE CONTENT LIST
Remove all packing materials
Remove remaining packaging and transit supports (if existing)
Check the completeness of the packing content
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.