Operation Manual

ManualsBrandsPowerplus ManualsOtherPOW1880

POW1880 EN

1 APPLICATION ................................................................................ 2

2 DESCRIPTION (FIG A) ................................................................... 2

3 PACKAGE CONTENT LIST ............................................................ 2

4 SYMBOLS ....................................................................................... 2

5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 3

5.1 Working area .......................................................................................................... 3

5.2 Electrical safety ..................................................................................................... 3

5.3 Personal safety ...................................................................................................... 3

5.4 Power tool use and care ........................................................................................ 4

5.5 Service .................................................................................................................... 4

6 MACHINE-SPECIFIC SAFETY WARNINGS .................................. 4

7 ASSEMBLY ..................................................................................... 5

7.1.1 Selecting the Application Tool/Accessory ................................................................. 5

7.1.2 Mounting/Replacing the Application Tool/ Accessory (Fig. 1) ................................... 5

7.1.3 Mounting/Replacing a sandpaper on the sanding plate (Fig. 2) ................................ 6

8 OPERATION.................................................................................... 6

8.1 Switching ON/OFF (Fig. 3) ..................................................................................... 6

8.2 Speed adjusting (Fig. 4) ........................................................................................ 6

8.3 Application tips ...................................................................................................... 6

8.3.1 Sawing..................................................................................................................... 6

8.3.2 Sanding ................................................................................................................... 6

8.3.3 Scraping .................................................................................................................. 7

9 CLEANING AND MAINTENANCE ................................................. 7

10 TECHNICAL DETAILS .................................................................... 7

11 NOISE .............................................................................................. 7

12 WARRANTY .................................................................................... 8

13 ENVIRONMENT .............................................................................. 8

14 DECLARATION OF CONFORMITY ............................................... 9

Summary of content (9 pages)

PAGE 1
POW1880 EN 1 APPLICATION ................................................................................ 2 2 DESCRIPTION (FIG A) ................................................................... 2 3 PACKAGE CONTENT LIST............................................................ 2 4 SYMBOLS ....................................................................................... 2 5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 3 5.1 Working area ................................
PAGE 2
EN POW1880 MULTI-USE TOOL 300W POW1880 1 APPLICATION Depending on which accessory mounted this power tool is intended for dry sanding small areas and for sawing, scraping polishing, rasping, cutting and separating. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG A) 1. 2. 3. 4. 5.
PAGE 3
EN POW1880 In accordance with essential requirements of the European directive(s) Wear a mask In dusty conditions "Class II - The machine is double insulated; Earthing wire is therefore not necessary 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions for future reference.
PAGE 4
EN POW1880    Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable you retain control over the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from the power tool. Loose clothes, jewellery or long hair can become entangled in the moving parts. If there are devices for connecting dust extraction and collection facilities, please ensure that they are attached and used correctly.
PAGE 5
EN POW1880   Do not treat the surface to be worked with solvent-containing fluids. Materials being warmed up by the scraping can cause toxic vapours to develop. Exercise extreme caution when handling the shovel blade. The accessory is very sharp; danger of injury. 7 ASSEMBLY WARNING: Always check that the power supply corresponds to the voltage on the rating name plate. Remove the power tool from the packaging. Do not plug it into the electrical grid before assembly.
PAGE 6
POW1880 EN Check the tight seating of the application tool/accessory. Incorrect or not securely fastened application tools/accessories can come loose during operation and pose a hazard. 7.1.3     Mounting/Replacing a sandpaper on the sanding plate (Fig. 2) The sanding plate is fitted with Hook & loop backing for quick and easy fastening of sandpaper with Hook & loop adhesion.
PAGE 7
EN POW1880 When selectively sanding on the spot, the sanding sheet can heat up considerably. Reduce the orbital stroke rate and allow the sanding sheet to cool down regularly. A sanding sheet that has been used for metal should not be used for other materials. 8.3.3 Scraping For scraping, select a high oscillation rate. Work on a soft surface (e.g. wood) at a flat angle and apply only light pressure. Otherwise the shovel blade can cut into the surface.
PAGE 8
POW1880 EN 12 WARRANTY               This product is warranted for a 24-month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.
PAGE 9
EN POW1880 14 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Multi-use tool Trade mark: POWERplus Model: POW1880 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.