Operation Manual
32
PHG 3000 B2
GB
Handling and operation
In this chapter you receive important information for the handling and operation
of the appliance.
Operating switch
The operating switch
2
has 4 positions and switches the ventilator and the
heating levels on and off .
= Appliance switched off
= only ventilator
= Ventilator and heating level 1
= Ventilator and heating level 2
Temperature regulator
The temperature regulator
3
is steplessly adjustable.
By turning it clockwise a higher temperature is set, by
turning it anti-clockwise a lower temperature will be set.
Heating operation
♦ Ensure that the operating switch
2
is at position 0 (off ).
♦ If the appliance is being taken into service for the fi rst time or if you want
to reset the desired temperature, turn the temperature control
3
to the
MAX position.
♦ Set the operating switch
2
to the desired operating mode.
Setting the temperature
♦ Turn the temperature regulator
3
fi rstly to the Max position.
♦ When the room has reached the desired temperature, slowly turn the
temperature regulator
3
anti-clockwise until a slight click sound is heard.
This means that the heating element is now switched off .
♦ The heating element is now switched on and off automatically by the
thermostat and the temperature is kept constant.
NOTICE
►
The ventilator continues to run when the temperature regulator has switched
the heating element off . The appliance thus circulates the air in the room
and so determines optimally, if the room. has cooled
IB_90988_PHG3000B2_LB1.indb 32IB_90988_PHG3000B2_LB1.indb 32 09.07.13 16:4709.07.13 16:47