Full Product Manual

Part III: Operating the Wood Chipper
8
Blowing Operation
Your Leaf blower is equipped with an air director cone to allow the operator to direct the air
stream up or down as required to assist in moving debris. This feature is extremely useful
when debris has piled up to the point that it cannot be blown any farther. The air stream can
be directed upward to blow the top of the debris pile over and allow the operator to continue
moving more debris farther.
Adjusting Air Director
To adjust air direction, first loosen knob and then position air director cone to desired angle.
When the cone is at a suitable position tighten knob to secure. DO NOT position director
cone to where it will blow debris towards people, vehicles or other objects in vicinity. Flying
debris may damage, harm, or cause injury to people or objects in air flow range.