Specifications

KVM over IP Module
Bandwidth limitation
The maximum network traffic generated through the IP-KVM ethernet device. Value in
Kbit/s.
Enable Telnet access
This enables the Telnet function.
Enable SSH access
This enables the SSH (Secure SHell) function.
Disable Setup Protocol
Enable this option to exclude the IP-KVM from the setup protocol. Setup protocol is a
proprietary layer-2 MAC-based protocol to allow some configuration software to detect
IP-KVM devices in the network, even without IP address, and then config network related
settings to IP-KVM..
LAN Interface Settings
The “Autodetect” will set the ethernet speed to the fastest possible value supported by both
endpoints of the link. For example, if you use a 10M/half duplex HUB, this speed will be
auto-selected. If this option does not work with some network device (HUB, switches, and
routers), you can set the Ethernet interface speed of IP-KVM manually to the values as
supported by the network device.
5.5.2 Dynamic DNS
Figure 5-19 Dynamic DNS
76 / 110