Specifications

KVM over IP Module
2. You may create an ISO image size up to 650Mb (for CD-ROM). This drive would be in
read-only mode and would not allow you to write any information on this drive but copying
only. This drive would be bootable under DOS mode if the motherboard/BIOS on the host
computer supports USB BOOTABLE function. For emulating DVD Drive, please use Drive
Redirection function.
3. The above information has to be given from the point of view of IP-KVM with correct IP
address and device name. Administrative permission is required as regular user may not have
the right to access. Please login as a system administrator (or as “root” on UNIX systems).
4. The specified image file is supposed to be accessible from the IP-KVM. The information
above has to be given from the point of view of the IP-KVM. It is important to specify correct
IP addresses, and device names. Otherwise, IP-KVM may not be able to access the referenced
image file properly, leave the given file unmounted and will display an according error
message, instead. So, we recommend to state correct values and repeat this step if necessary.
5. Furthermore, the specified share has to be configured correctly. Therefore, administrative
permissions are required. As a regular user you may not have these permissions. You should
either login as a system administrator (or as “root” on UNIX systems), or ask your system
administrator for help to complete this task.
Operation Procedures:
1. Please run Nero or any CD imaging tool to create CD-ROM ISO image.
2. Please create a folder and share this folder. (Please make sure password has to be setup with the
authorized user during Sharing => Permission settings)
3. Copy the CD-ROM ISO image file to this sharing folder.
4. Fill in the sharing information on Image on Windows Share, click on the Set button.
48 / 110