Specifications

KVM over IP Module
5.1.1 KVM Console
Figure 5-1 KVM Console
To open the KVM console either click on the icon Console or Remote Control > KVM
Console of the menu entry on the left or Click to open of the console picture on the right.
5.1.2 Telnet/SSHConsole
In general, the Telnet or SSH interface supports two operation modes: the command line mode and
the terminal mode. The command line mode is used to control or display some parameters. In
terminal mode the pass-through access to serial port is activated (if the serial settings were
configured accordingly). All inputs are redirected to the device on serial port and its answers are
displayed on the Telnet interface.
In order to log in with Telnet or SSH, you have to enable the access settings from
Device Settings > Network.
40 / 110