Datasheet

Printed at 11-06-2015 20:06

- 1 -

IXARC Rotary Encoder

UCD-S100B-2012-H12S-PRQ

Interface

Interface SSI with Preset

Manual Functions Preset + complement via cable or connector

Interface Cycle Time > 25 µs

Outputs

Output Driver RS422

Electrical Data

Supply Voltage 4.75 – 30 VDC (On power supplies comply with EN 50178)

Current Consumption Typical 50 mA

Power Consumption ≤ 1.5 W

Start-Up Time < 250 ms

Clock Input RS 422, via Optocoupler

Clock Frequency 100 kHz – 2 MHz

Reverse Polarity Protection Yes

Short Circuit Protection Yes

EMC: Emitted Interference DIN EN 61000-6-4

EMC: Noise Immunity DIN EN 61000-6-2

Sensor

Technology Magnetic

Resolution Singleturn 12 bit

Resolution Multiturn 20 bit

PAGE 1
IXARC Rotary Encoder UCD-S100B-2012-H12S-PRQ Interface Interface SSI with Preset Manual Functions Preset + complement via cable or connector Interface Cycle Time > 25 µs Outputs Output Driver RS422 Electrical Data Supply Voltage 4.75 – 30 VDC (On power supplies comply with EN 50178) Current Consumption Typical 50 mA Power Consumption ≤ 1.
PAGE 2
Multiturn Technology Self powered magnetic pulse counter (no battery, no gear) Accuracy (INL) ± 0.
PAGE 3
Connection Plan SIGNAL PIN NUMBER Power Supply 2 GND 1 Data+ 5 Data- 6 Clock+ 3 Clock- 4 Preset 7 DIR 8 Shielding Connector Housing Connector-View on Encoder Rotation Clockwise (seen on shaft) Dimensional Drawing Printed at 11-06-2015 20:06 -3-
PAGE 4
Contact FRABA America +1 (609) 750-8705 info@fraba.com FRABA Europe +49 (0) 221 96213-0 info@fraba.eu FRABA Asia +65 6514-8880 info@fraba.sg The picture and drawing are for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings. All dimension in [inch] mm. © FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.