Data Sheet

ManualsBrandsPOSITAL FRABA ManualsSensorsIncremental Rotary encoder 1 pc(s) Magnetic Blind hollow shaft 36 mm

Data Sheet

Printed at 15-02-2018 17:02

- 1 / 5 -

IXARC Incremental Encoder

UCD-IPT00-04096-VCS0-PAQ

Interface

Interface Programmable Incremental

Programming Functions PPR (1-16384), Output, Counting Direction

Configuration Tool UBIFAST Configuration Tool (Version ≥ 1.6.3)

Outputs

Output Driver RS 422 (TTL)

Quadrature Phasing 90° ± 4.5° electrical

Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage

> V-3 V @ 9-30 V Supply Voltage

Output Voltage Low Level Push-Pull (HTL) < 0.5 V

Output Voltage High Level RS422 (TTL) > 4 V

Output Voltage Low Level RS422 (TTL) < 0.5 V

Maximum Frequency Response 1 MHz

Maximum Switching Current 50 mA per Channel

Electrical Data

Supply Voltage 4.75 – 30 VDC

Current Consumption ≤140mA @ 5V DC, ≤70mA @ 10V DC, ≤40mA @

24V DC

Power Consumption ≤ 1.0 W

Start-Up Time < 250 ms

Min. Load Resistance 120 Ω

Summary of content (5 pages)

PAGE 1
IXARC Incremental Encoder UCD-IPT00-04096-VCS0-PAQ Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration Tool (Version ≥ 1.6.3) Outputs Output Driver RS 422 (TTL) Quadrature Phasing 90° ± 4.5° electrical Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage > V-3 V @ 9-30 V Supply Voltage Output Voltage Low Level Push-Pull (HTL) < 0.
PAGE 2
Reverse Polarity Protection Yes Short Circuit Protection Yes EMC: Emitted Interference DIN EN 61000-6-4 EMC: Noise Immunity DIN EN 61000-6-2 MTTF 280 years @ 40 °C Sensor Technology Magnetic Accuracy (INL) ±0.
PAGE 3
Electrical Connection Connection Orientation Axial Connector M12, Male, 8 pin, a coded Certification Approval CE + cULus listed, Industrial Control Equipment Product Life Cycle Product Life Cycle Established Connection Plan SIGNAL PIN NUMBER A 3 /A 4 B 5 /B 6 Z 7 /Z 8 Power Supply 2 GND 1 Shielding Connector housing Connector-View on Encoder Pulse Diagram Data Sheet Printed at 15-02-2018 17:02 -3/5-
PAGE 4
Rotation Clockwise (seen on shaft) 2D Drawing Accessories Configuration/Programming Tools UBIFAST Configuration Tool Data Sheet Printed at 15-02-2018 17:02 -4/5-
PAGE 5
Connectors & Cables 5m PUR Cable, 8pin, A-Coded, f 10m PUR Cable, 8pin, A-Coded, f 2m PUR Cable, 8pin, A-Coded, f 10m PUR Cable, 8pin, A-Coded, f M12, 8pin A-Coded, Female More Displays AP20-00 Counter AP20-D0 Counter (4 dig. o/p) AP20-0A Counter (analog o/p) AP20-DA Counter (4 dig. + analog o/p) DiMod Counter (Relay o/p) More Clamping Rings Clamping Ring V12 Contact Contact Us The picture and drawing are for general presentation purposes only.