Data Sheet

ManualsBrandsPOSITAL FRABA ManualsSensorsIncremental Rotary encoder 1 pc(s) Magnetic Sychro flange (heavy duty) 36 mm

Data Sheet

Printed at 15-02-2018 16:02

- 1 / 5 -

IXARC Incremental Encoder

UCD-IPT00-01024-D10D-2RW

Interface

Interface Programmable Incremental

Programming Functions PPR (1-16384), Output, Counting Direction

Configuration Tool UBIFAST Configuration Tool (Version ≥ 1.6.3)

Outputs

Output Driver RS 422 (TTL)

Quadrature Phasing 90° ± 4.5° electrical

Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage

> V-3 V @ 9-30 V Supply Voltage

Output Voltage Low Level Push-Pull (HTL) < 0.5 V

Output Voltage High Level RS422 (TTL) > 4 V

Output Voltage Low Level RS422 (TTL) < 0.5 V

Maximum Frequency Response 1 MHz

Maximum Switching Current 50 mA per Channel

Electrical Data

Supply Voltage 4.75 – 30 VDC

Current Consumption ≤140mA @ 5V DC, ≤70mA @ 10V DC, ≤40mA @

24V DC

Power Consumption ≤ 1.0 W

Start-Up Time < 250 ms

Min. Load Resistance 120 Ω

Summary of content (5 pages)

PAGE 1
IXARC Incremental Encoder UCD-IPT00-01024-D10D-2RW Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration Tool (Version ≥ 1.6.3) Outputs Output Driver RS 422 (TTL) Quadrature Phasing 90° ± 4.5° electrical Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage > V-3 V @ 9-30 V Supply Voltage Output Voltage Low Level Push-Pull (HTL) < 0.
PAGE 2
Reverse Polarity Protection Yes Short Circuit Protection Yes EMC: Emitted Interference DIN EN 61000-6-4 EMC: Noise Immunity DIN EN 61000-6-2 MTTF 280 years @ 40 °C Sensor Technology Magnetic Accuracy (INL) ±0.
PAGE 3
Minimum Mechanical Lifetime (10^8 revolutions with Fa/Fr) 10 (180 N / 180 N), 15 (150 N,150 N), 30 (100 N / 100 N) Electrical Connection Connection Orientation Radial Cable Length 2 m [79"] Wire Cross Section 0.34 mm² / AWG 22 Material / Type PUR / PU Cable Diameter 7.5 mm (0.30 in) Minimum Bend Radius 56 mm (2.
PAGE 4
Rotation Clockwise (seen on shaft) 2D Drawing Accessories Configuration/Programming Tools UBIFAST Configuration Tool Data Sheet Printed at 15-02-2018 16:02 -4/5-
PAGE 5
Couplings Coupling Disc Type-10-12 Coupling Bellow Type-10-10 Coupling Bellow Type-06-10 Coupling Bellow Type-08-10 Coupling Bellow Type-10-12 Coupling Bellow Type-10-(1/4") Coupling Bellow Type-10-(3/8") Coupling Jaw Type-06-10 Coupling Jaw Type-08-10 Coupling Jaw Type-10-12 Coupling Jaw Type-10-(1/4") Coupling Jaw Type-10-(3/8") Coupling Jaw Type-10-10 Coupling Disc Type-06-10 Coupling Disc Type-10-10 More Displays AP20-00 Counter AP20-D0 Counter (4 dig.