Datasheet

Printed at 12-06-2015 04:06
- 2 -
Environmental Specifications
Protection Class (Shaft) IP65
Protection Class (Housing) IP65
Operating Temperature -40 °C (-40 °F) - +85 °C (+185 °F)
Humidity 98% RH, no condensation
Mechanical Data
Housing Material Steel
Housing Coating Cathodic corrosion protection (>720 hrs salt spray
resistance)
Flange Type Clamp, ø 58 mm (C)
Flange Material Aluminum
Shaft Type Solid, Single Flat, Length = 20 mm
Shaft Diameter ø 10 mm (ø 0.39")
Shaft Material Stainless Steel V2A (1.4305, 303)
Max. Shaft Load Axial 40 N, Radial 110 N
Minimum Mechanical Lifetime
(10^8 revolutions with Fa/Fr)
430 (20 N / 40 N), 150 (40 N / 60 N), 100 (40 N / 80 N), 55
(40 N / 110 N)
Rotor Inertia ≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque ≤ 3 Ncm @ 20 °C (0.66 oz-in @ 68 °F)
Max. Permissible Mechanical Speed ≤ 12000 1/min
Shock Resistance ≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance ≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length 41,7 mm (1.64")
Weight 305 g (0.67 lb)
Electrical Connection
Connection Orientation Axial
Connector M27, Male, 26 pin
Connection Plan
Dimensional Drawing