Installation Guide

6
ASSEMBLY INSTRUCTIONS
Prepare wire by stripping 3/4 in. of insulation from
wire ends using wire strippers (not included).
Connect WHITE wire from fixture (A) to WHITE
wire from outlet box using existing wire connector
or wire connector (AA). Connect BLACK wire from
fixture (A) to BLACK wire from outlet box using
existing wire connector or wire connector (AA).
Connect BARE/GREEN ground wire from outlet
box to GREEN ground wire from fixture (A) using
existing wire connector or wire connector (AA).
NOTE: Screw wire connectors (AA) on in a
clockwise direction.
WARNING: Never connect BARE/GREEN
ground wire to WHITE or BLACK power supply
wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA) are
designed to accept only one 12-gauge house wire
and two lead wires from the light fixture. If your
house wire is larger than 12-gauge or there is more
than one house wire to connect to the
corresponding fixture lead wires, consult an
electrician for the proper size wire connectors to
use.
5.
x 3
Hardware Used
Wire Connector
AA
6.
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
5
Outlet Box
BARE/
GREEN
WHITE
BLACK
GREEN
AA
AA
C
A
WHITE
BLACK
Outlet Box
6
AA
AA