Use and Care Manual

General Care Tips

Many items can be maintained regularly by simply wiping with a soft dry cloth to remove dust.

To protect your furniture, avoid placing it in direct sunlight or too close to heat sources. Do not place

hot items directly onto furniture as they can damage the finish. Use felt pads or other protective layers

such as coasters when placing any items on finished surfaces.

If spills occur, wipe immediately with a soft damp cloth or spot treat. Make sure to wipe dry after

cleaning to avoid water spots.

Do not use harsh chemicals or abrasives as they can damage surface areas.

Basic Upholstery Fabric Care Tips

For everyday cleaning of your fabric upholstered pieces, use the upholstery attachment on your

vacuum cleaner to vacuum the surface of the furniture to remove any loose dirt. It’s also a good idea

to vacuum underneath the cushions as well.

If you can, flip your cushions regularly to distribute the wear and to reduce soiling.

Clean spills immediately by gently blotting with a clean, absorbent cloth. If a stain remains, then you’ll

have to do some deeper cleaning according to the fabric’s code.

W Code W stands for ‘Water based cleaner’. This code means that you can spot clean your fabric

with a water-based shampoo or foam upholstery cleaner. You can use a brush to agitate the cleaner or

even an upholstery attachment on a carpet cleaner. Be careful to avoid over-wetting the stain.

PAGE 1
General Care Tips Many items can be maintained regularly by simply wiping with a soft dry cloth to remove dust. To protect your furniture, avoid placing it in direct sunlight or too close to heat sources. Do not place hot items directly onto furniture as they can damage the finish. Use felt pads or other protective layers such as coasters when placing any items on finished surfaces. If spills occur, wipe immediately with a soft damp cloth or spot treat.
PAGE 2
S Fabrics that are Code S must be cleaned with solvents (dry clean only). You can spot treat stains with a water-free solvent or dry-cleaning product. Use solvent cleaners in a well-ventilated room and keep away from open flames. Avoid using cleaning products containing carbon tetrachloride, as it is highly toxic. W/S A W/S code, as you might expect, means that a combination of dry cleaning solvents and water-based cleaners may be used.