Instructions / Assembly

Back

Front

4MM T-HANDLE HEX KEY

(INCLUDED)

A - 1/4-20 X 1-3/4 WAFER SHCS

B - .27 X 3 SOCKET WAFER "A"

12/3/2012

ASSEMBLY INSTRUCTIONS

Qty. Description.

MODEL 9010

ALL HARDWARE IS STAINLESS STEEL

TOOLS NEEDED

Do not tighten screws until last step.

using (4) 3" screws.

Attach braces into pockets on side frames

using (4) 1-3/4 bolts..

Attach seat assembly to side frames

STEP 2

STEP 1

- (1) HARDWARE PACK

- (1) BRACE

- (1) MEDALLION BRACE

- (1) BACK ASMB

using (4) 1-3/4 bolts.

Tighten all screws.

- (2) SIDE FRAMES RH/LH

- (1) SEAT ASMB

STEP 3

Attach back assembly to side frames

PAGE 1
STEP 1 Attach braces into pockets on side frames using (4) 3" screws. MODEL 9010 Do not tighten screws until last step. B B - (2) SIDE FRAMES RH/LH - (1) SEAT ASMB - (1) BACK ASMB - (1) MEDALLION BRACE - (1) BRACE - (1) HARDWARE PACK Front STEP 2 Attach seat assembly to side frames using (4) 1-3/4 bolts.. A A TOOLS NEEDED Back 4MM T-HANDLE HEX KEY (INCLUDED) Qty. Description. A - 1/4-20 X 1-3/4 WAFER SHCS STEP 3 Attach back assembly to side frames using (4) 1-3/4 bolts. Tighten all screws.